Feature and usage:

Feature:
★equipped big diaphragm and optional folio Flange, easy to install
★80% less temperature drift than non-compensation component
★correct rate improves to ±0.25％FS
★temperature input available :（RTD或2nd4-20mA）
★HARTTM digital communication system
★fulfils CE-PED EU standard requirements
★range of customer’s setting ：0-750 to 0-10,000psi

product  describe: 　
PT296 is a smart 4-20mA pressure sensor including temperature compensation system, DynalarityTM and a WUYUE advanced PCB. PT296 offers the best specification performance in the circuit. Temperature compensation is based on initial RTD measuring data, compensating temperature change, which result in  less drift of about temperature，improving accuracy. After installation, you don’t need zero modulation for temperature change again. PT296 adopts a advanced computing rule to offset linear change, the offsetting is caused by sensor crafts. Complex temperature compensation and Dynalarity decrease up to 80% temperature drift，it also improves 60% accuracy more than other sensor. It uses machining temperature to output ,choosing HART communication standard . explosion-proof, nonflammable and its nature safe equipment, which will be certificated soon. PT296 is fully welded, equipped big diaphragm and optional folio Flange ,easy to install. The design makes the probes can accurately measure temperature and pressure at one point. temperature sensor has 4 kinds of resistances to choose:J,K,E,pt100BO.

Tech-parameter:
Input voltage ：16-32Vdc
output modulation ：4-20mA（standard voltage ,changeable temperature）
digital output ：HART
complex accuracy（error）（20-100％ full range）：±0.25％ full scale（over 3M and 3M）    ±0.35％ full scale （below 1.5M and 1.5）
temperature drift （77-572℉，25-300℃）：0.001％ full scale /℉，max（0.001％ full range /℃，max）
repeatable ：±0.1％
blasting rated pressure ：2X full scale
rated over pressure ：1.5X full scale
range：1,500 to 10,000psi
available range ：6：1 change rate ，downward
load resistance ：250 Ω @18Vdc；500Ω @23Vd

Machine parameter
diaphragm
temperature limit：600℉（315℃），max
zero drift（temperature around changes）：1psi/100℃，typical condition （75psi/450℃）
electrical operation temperature ：-4 to +185℉（0 to 85℃）
install torque ：125in/lbs,max
damp part (normal)：including 15-5PHSST coating DyMaxTM
Weight , pure weight：5.0 lbs(2.27kg)
monitor：SPXD loop power supply monitor