搜索:

您所在的位置:纺机网 >> 孝感市五岳传感器有限公司 >> PT291 melt pressure transmitter

产品推荐

产品分类

友情链接

联系方式

  • 联系人:熊建华
  • 邮 箱:wuyue929@126.com
  • 地 址:湖北省孝感市三汊镇孝天路特2号
  • 手 机:13508690205 13307299110
  • 电 话:86-0712-2456111 2456222 2456333 2456444 2839725
  • 传 真:86-0712-2456456
  • 网 址:http://www.wycgq.com/
分享到:

PT291 melt pressure transmitter

发布时间:2013-08-05

 

 

 
Feature and usage:
★ HARTTM digital communication system
★ 4-20mA loop power supply output
★ 0-250 to 0-30,000psi
★explosion-proof,ATEX/ intrinsic safety certification
★ conformity with PED and CE requirements benefits
★ linear improvement 80%
★ a handheld device configuration
★ provide output directly to DCS or PLC
★ pressure range defined by the customers
★ access to hazardous area certification
★ in line with new EC requirement


Products describe:

PT291 is a smart pressure sensor supplied of 4-20mA,button –sealed ,so it can work on dangerous condition.PT2911  has  a welding structure, with a 1/2-20UNF thread, can be used in standard transducer mounting holes. Besides ,it also uses heat coupled or RTD to measure melt’s temperature. PT291 applies with 1 level,1 district,A,B,C&D group of hazardous area of explosion-proof certification. PT291 ATEX/ safe 1ooa Eex IA ‖ ‖ 1 g c, 0 and 1 certification. ATEX/ intrinsically safe mode can provide the sealing wire connections or a sealing 6 -pin Bendix connectors. PT291also have a WUYUE advanced  computing module , which detects a linear change caused by material heated .all makes the probes can accurately measure pressure and temperature at one point . temperature has 4 kinds of equipments : J,K,E or PT100BO resistance.


Technical parameters

Output: 4-20mA, With an optional HARTTM digital communications
Input voltage: 16-36Vdc(Standard) 16-30Vdc(ATEX/ intrinsically safe applications)
Integrated error:+/-0.20%FSO ( including linearity , repeatability and hysteresis)
Repeatability:+/-0.1%FSO
Adjustment range: 3:1 turndown ratio , down
Overpressure: 2X FSOOr 35,000psi, whichever is the smaller.
Zero point adjustment: -40% To +10%; range <500psi:-80% to +20%
Gain adjustment range:+/-2%FSO maximum
Load resistance: 500Ohm @26Vdc1000 ohm@36Vdc


Temperature & Mechanical characteristics

Diaphragm maximum temperature: 750℉(400℃)
Zero point drift under temperature changes:Typical 15psi/100f (27psi/100° c)
Electric operating temperature:-20℉—185℉(-29℃—85℃)  0F-150degrees c (-18° c-65° c) temperature compensation range of temperature:
Effect of zero or full Cheng Re: 0.01% Full scale /f maximum (0.02% full scale /° c max)
Installation torque: Maximum 500 inches/lbs.
Standard wet section: 15-5PHSST coating DyMaxTM