LGA368型高速整经机

■ 主要技术特征
● 高速度、大卷装、交流电机直接拖动经轴，并由PLC控制、变频器实现无级调速，恒线速卷绕。
● 采用光栅编码器与电脑组成的对经轴直接计长的先进计长与测速系统，消除了间接计长的误差，同时采用另一只光栅编码器和导纱辊进行跟踪计长，保证准确。
● 由先进的电脑系统与触摸屏的智能终端组成的操作界面，可设定和显示各种工艺性能参数，有故障检测系统检测故障。
● 经轴、压辊、测速辊三辊同步高效制动，压辊设有阻尼加压和瞬间回弹装置，以避免对纱线的磨损。
● 经轴拍合、采用电机驱动，机械夹紧，定心准确安全。
● 高速转动体经过了动平衡，在纱线强度允许情况下，真正实现高速运转。
● 导纱辊采用铝合金管精加工，内填吸震剂，经过动平衡和表面阳极氧化处理，保证导纱辊耐磨和高速运转。
● 采取左右钳制式双重刹车。
● 箱体间内置加强式结构，刚性特强，运转平稳。
● 全封闭挡风玻璃，人性化设计，安全、静音、清洁、美观。
● 设有机电连锁保护装置，安全操作栏杆、任何异常情况迅速停车，绝对保证机器及人生安全。
● 筒子架优化组合，适应各种品种的需求。
● 灵敏的断纱自停，任何一断头都无处逃遁。

主要技术参数:
压辊加压形式 弧线式 平行针线式
设计车速：1200m/min
经轴边盘直径：Ф800mm、Ф1000mm、Ф1250mm、Ф1460mm
幅    宽：1800mm、1600mm、1400mm
          （可根据客户要求选择，达2800mm）
制动距离：≤3m
筒子架容量：560            （可根据客户要求选择）
锭     距：240×240mm、300×300mm          （可根据客户要求选择）
层     数：6层 (可根据客户要求选择)
主电机参数：7.5kw/380v、11kw/380v、15kw/380v (据具体规格定)

 CPU及变频器

显示屏

LGA368High-speed Warper
    Main Technical Parameters
    1.High speed, great package, AC motor directly drives warp beam, controlled speed is steplessly adjusted by inverter, winding at a constant linear speed.
    2.The advanced counting and speed measuring system consisted of grating coder and computer, eliminate indirect counting error. Meanwhile another grating coder and the guide roller trace the counting to ensure the accuracy.
    3.The operating interface consisted of advanced computer terminal and touching screen, can set and display all Kinds of technological parameters, which are detected by the trouble detecting system.

  4.Warp beam, press roller and measuring roller are synchronously braked effectively press roller presses beam in damping type and rebounds instantly, avoiding yarn wearing.
    5.Warp beam is mounted by motor, mechanically clamped, positioned accurately.Warp beam is dynamically balanced, can run at as high speed as the yarn tension allows.
    6.The guide roller is made of aluminum alloy, inside which vibration absorbing agent is filled, dynamically balanced and done treatment of anode, ensuring wear-lasting and high speed rotation.
    7.Warp beam is braked on the both sides with clamping type brakes.

 8.Totally-closed windshield, Quiet, clean, elegant, comfortable.
    9.Strengthened inside structure makes the warpers very good steady.
    10.The best combination of creels adapts a very wide variety.
    11.The sensitive stop motion makes no one broken end can' t be
    12.Integrated closed infrared stop motion.
    13.The mechanical and electric inter lock protection and the safety make the machine stop in any abnormal cases,ensure life and machine's safety.
 Main Technical Parameters
  Press roller press type: arc line /parallel line type
  1.Design speed: 1200m/min
  2.Diameter of flange of beam: Ф800mm,ФlO00mm,Ф1250mm,Ф1460mm (other available)
3.Working width: 1800mm,1600mm,1400mm,
(other available 2800mm)
  4.BraKing distance: ≤3m
  5.Capacity of creel:560 (other available)
  6.Distance of spindles:240×240mm, 300×300mm(other available)
  7.Number of layers:6 (other available)
  8.Parameters of main motor: 7.5Kw/380v, 11Kw/380v, 15Kw/380v (They vary to the needs of cansumers)

Creel           Display screen     CPU&inverter