- [新闻]-->凯成纺机:实事求是,打造技术创新
 - [产品]-->CY250A大卷装倍捻机
 - [产品]-->CY250B大卷装倍捻机
 - [产品]-->Cy250C大卷装倍捻机
 
 您所在的位置:纺机网 >> 浙江凯成纺织机械有限公司 >> CY256短纤倍捻机
    产品推荐
产品分类
联系方式
- 联系人:梁朝阳
 - 邮 箱:chaoyang@china-chaoyang.com
 - 地 址:城关镇张家庄5#
 - 手 机:13906856940
 - 电 话:86-575-86220582
 - 传 真:86-575-86231240
 - 网 址:http://www.chinakaicheng.com
 
CY256短纤倍捻机
发布时间:2011-03-10
CY256短纤倍捻机 
 
适用范围 
棉纱、毛纱、腈纶纱以及其他混纺纱等。 
Applied range
CY256 is applied to cotton yarn, woolen yarn, acrylic yarn and other blended yarns.
特点
- 高品质的锭子在高速运转下的稳定性;
 - 锭子采用曲线安装方式,减少了负荷,大大降低了用电量;
 - 筒子架采用凸轮式加压装置,可以保证筒子成形,从小到大压力均匀;
 - 精心设计的齿轮箱结构及成形凸轮,使卷绕成形良好;
 - 卷绕张力可以在超喂罗拉上任意调节,因此也适用于染色松弛柔软的卷绕;
 - 整机采用双层双面结构,占地面积少、产量高、功耗低、投资少、选用价值高。
 
Features
- The perdurable stability of high quality spindle at the high-speed operation;
 - The spindles is adopted by the curve installation mode which reduces the load and electricity consumption greatly;
 - The bobbin creel uses the cam type compression device, which ensures the bobbin forming, the pressure is equably from small to big;
 - Well-designed gear box structure and builder cam make the winding forming good;
 - The winding tension can be adjusted on the pre-take-up roller, therefore, it is also applied to winding of loose dyeing;
 - The CY256 staple two-for-one twister is double-sides and double-layer with small area, high output, low power consumption, less investment, and high selection value.
 
技术参数 Technical Parameter
机器形式 Form of operation  | 
            
             双面双层 Double sides and double layers  | 
        
| 
             锭数 Number of spindles  | 
            
             256  | 
        
| 
             锭距 Spindle gauge  | 
            
             225mm  | 
        
| 
             锭速 Spindle speed  | 
            
             5000-10000r/min,变频可调至2000r/min  | 
        
| 
             捻向 Twist direction  | 
            
             S向或Z向 S or Z  | 
        
| 
             捻度 Twist range  | 
            
             65-3000t/m  | 
        
| 
             卷绕角 Take-up angle  | 
            
             10°51′-23°19′  | 
        
| 
             锭子传动 Spindle drive  | 
            
             切线龙带传动 Belt circulation drive  | 
        
| 
             启动方式 Start-up Mode  | 
            
             星三角慢速启动 Star-delta slowly start  | 
        
| 
             涨力器 Tensioner  | 
            
             胶囊式 Capsule type  | 
        
| 
             卷绕动程 Traverse  | 
            
             152mm  | 
        
| 
             电机功率 Motor power  | 
            
             2×11kw  | 
        







